Effects of tillage systems on maize yield and porosity of the irrigated chernozem ploughing layer
Uticaj sistema obrade na prinos kukuruza i poroznost oraničnog sloja navodnjavanog černozema
Abstract
With the aim to create favorable conditions for the plant development, the studies on effects of different tillage systems on maize yield and porosity changes of the irrigated chernozem ploughing layer were performed. The objective of the studies was conventional tillage (disc harrow, plough, seedbed conditioner), reduced tillage (rotary shredder) and direct drilling (direct drill seeder). The analysis of variance performed for the yield shows significant differences among observed tillage systems carried out on chernozem. The highest yield of 12.39 t·ha-1 was obtained by conventional tillage. Yields obtained by reduced tillage and direct drilling were lower and amounted to 11.03 t·ha-1 and 10.03 t·ha-1, respectively. The conventional tillage system provided the most favorable porosity with the average value of 51.08%. With no statistical significant differences, the porous to solid phase ratio was somewhat less favorable in soil tilled by the rotary shredder (50.47 vol.%), while it wa...s significantly lower in the variant of direct drilling (48.12 vol.%).
U cilju stvaranja povoljnih uslova za razviće biljke, obavljena su proučavanja uticaja različitih sistema obrade na prinos kukuruza i ukupnu poroznost oraničnog sloja navodnjavanog černozema. Predmet istraživanja bila je konvencionalna obrada (tanjirača, plug, setvospremač), redukovana (rotositnilica) i direktna setva (sejalica za direktnu setvu). Analiza varijanse prinosa pokazuje signifikantne razlike između proučavanih sistema obrade černozema. Najbolji rezultati prinosa ostvareni su konvencionalnom obradom-12,39t/ha, zatim redukovanom-11,03t/ha i najniži direktnom setvom-10,03t/ha. Konvencionalna obrada obezbedila je najpovoljniju ukupnu poroznost sa prosečnom vrednosti 51,08%. Bez statistički značajne razlike, odnos porozne i čvrste faze je bio nešto nepovoljniji kod zemljišta obrađenog rotositnilicom-50,47zap%, a značajno manji pri direktnoj setvi-48,12zap.%.
Keywords:
tillage / yield / total porosity / irrigated chernozem / obrada / prinos / ukupna poroznosti / navodnjavani černozemSource:
Poljoprivredna tehnika, 2009, 34, 2, 43-51Publisher:
- Univerzitet u Beogradu - Poljoprivredni fakultet - Institut za poljoprivrednu tehniku, Beograd
Collections
Institution/Community
MRIZPTY - JOUR AU - Kresović, Branka AU - Tolimir, Miodrag PY - 2009 UR - http://rik.mrizp.rs/handle/123456789/263 AB - With the aim to create favorable conditions for the plant development, the studies on effects of different tillage systems on maize yield and porosity changes of the irrigated chernozem ploughing layer were performed. The objective of the studies was conventional tillage (disc harrow, plough, seedbed conditioner), reduced tillage (rotary shredder) and direct drilling (direct drill seeder). The analysis of variance performed for the yield shows significant differences among observed tillage systems carried out on chernozem. The highest yield of 12.39 t·ha-1 was obtained by conventional tillage. Yields obtained by reduced tillage and direct drilling were lower and amounted to 11.03 t·ha-1 and 10.03 t·ha-1, respectively. The conventional tillage system provided the most favorable porosity with the average value of 51.08%. With no statistical significant differences, the porous to solid phase ratio was somewhat less favorable in soil tilled by the rotary shredder (50.47 vol.%), while it was significantly lower in the variant of direct drilling (48.12 vol.%). AB - U cilju stvaranja povoljnih uslova za razviće biljke, obavljena su proučavanja uticaja različitih sistema obrade na prinos kukuruza i ukupnu poroznost oraničnog sloja navodnjavanog černozema. Predmet istraživanja bila je konvencionalna obrada (tanjirača, plug, setvospremač), redukovana (rotositnilica) i direktna setva (sejalica za direktnu setvu). Analiza varijanse prinosa pokazuje signifikantne razlike između proučavanih sistema obrade černozema. Najbolji rezultati prinosa ostvareni su konvencionalnom obradom-12,39t/ha, zatim redukovanom-11,03t/ha i najniži direktnom setvom-10,03t/ha. Konvencionalna obrada obezbedila je najpovoljniju ukupnu poroznost sa prosečnom vrednosti 51,08%. Bez statistički značajne razlike, odnos porozne i čvrste faze je bio nešto nepovoljniji kod zemljišta obrađenog rotositnilicom-50,47zap%, a značajno manji pri direktnoj setvi-48,12zap.%. PB - Univerzitet u Beogradu - Poljoprivredni fakultet - Institut za poljoprivrednu tehniku, Beograd T2 - Poljoprivredna tehnika T1 - Effects of tillage systems on maize yield and porosity of the irrigated chernozem ploughing layer T1 - Uticaj sistema obrade na prinos kukuruza i poroznost oraničnog sloja navodnjavanog černozema VL - 34 IS - 2 SP - 43 EP - 51 UR - https://hdl.handle.net/21.15107/rcub_rik_263 ER -
@article{ author = "Kresović, Branka and Tolimir, Miodrag", year = "2009", abstract = "With the aim to create favorable conditions for the plant development, the studies on effects of different tillage systems on maize yield and porosity changes of the irrigated chernozem ploughing layer were performed. The objective of the studies was conventional tillage (disc harrow, plough, seedbed conditioner), reduced tillage (rotary shredder) and direct drilling (direct drill seeder). The analysis of variance performed for the yield shows significant differences among observed tillage systems carried out on chernozem. The highest yield of 12.39 t·ha-1 was obtained by conventional tillage. Yields obtained by reduced tillage and direct drilling were lower and amounted to 11.03 t·ha-1 and 10.03 t·ha-1, respectively. The conventional tillage system provided the most favorable porosity with the average value of 51.08%. With no statistical significant differences, the porous to solid phase ratio was somewhat less favorable in soil tilled by the rotary shredder (50.47 vol.%), while it was significantly lower in the variant of direct drilling (48.12 vol.%)., U cilju stvaranja povoljnih uslova za razviće biljke, obavljena su proučavanja uticaja različitih sistema obrade na prinos kukuruza i ukupnu poroznost oraničnog sloja navodnjavanog černozema. Predmet istraživanja bila je konvencionalna obrada (tanjirača, plug, setvospremač), redukovana (rotositnilica) i direktna setva (sejalica za direktnu setvu). Analiza varijanse prinosa pokazuje signifikantne razlike između proučavanih sistema obrade černozema. Najbolji rezultati prinosa ostvareni su konvencionalnom obradom-12,39t/ha, zatim redukovanom-11,03t/ha i najniži direktnom setvom-10,03t/ha. Konvencionalna obrada obezbedila je najpovoljniju ukupnu poroznost sa prosečnom vrednosti 51,08%. Bez statistički značajne razlike, odnos porozne i čvrste faze je bio nešto nepovoljniji kod zemljišta obrađenog rotositnilicom-50,47zap%, a značajno manji pri direktnoj setvi-48,12zap.%.", publisher = "Univerzitet u Beogradu - Poljoprivredni fakultet - Institut za poljoprivrednu tehniku, Beograd", journal = "Poljoprivredna tehnika", title = "Effects of tillage systems on maize yield and porosity of the irrigated chernozem ploughing layer, Uticaj sistema obrade na prinos kukuruza i poroznost oraničnog sloja navodnjavanog černozema", volume = "34", number = "2", pages = "43-51", url = "https://hdl.handle.net/21.15107/rcub_rik_263" }
Kresović, B.,& Tolimir, M.. (2009). Effects of tillage systems on maize yield and porosity of the irrigated chernozem ploughing layer. in Poljoprivredna tehnika Univerzitet u Beogradu - Poljoprivredni fakultet - Institut za poljoprivrednu tehniku, Beograd., 34(2), 43-51. https://hdl.handle.net/21.15107/rcub_rik_263
Kresović B, Tolimir M. Effects of tillage systems on maize yield and porosity of the irrigated chernozem ploughing layer. in Poljoprivredna tehnika. 2009;34(2):43-51. https://hdl.handle.net/21.15107/rcub_rik_263 .
Kresović, Branka, Tolimir, Miodrag, "Effects of tillage systems on maize yield and porosity of the irrigated chernozem ploughing layer" in Poljoprivredna tehnika, 34, no. 2 (2009):43-51, https://hdl.handle.net/21.15107/rcub_rik_263 .